DLT 8000 Tape Drive – 80GB, 6MB/s (Fibre, SCSI)

DLT 8000 Tape Drive – 80GB, 6MB/s (Fibre, SCSI)

The StorageTek DLT 8000 Tape Drive has a storage capacity of 40 gigabytes of uncompressed data on a single cartridge at speeds of up to 6 megabytes per second. This makes the DLT 8000 a perfect choice in terms of cost per gigabyte of any other mid level tape drive. The StorageTek DLT 8000 Tape Drive is a perfect solution for backup and recovery. It increases performance without requiring library, software, or media changes to existing DLT tape environments. It can be used in combination with other drives to match specific backup and restore performance and capacity needs.

The StorageTek DLT 8000 Tape Drive is a great expansion tool for disaster recovery enviroments built on DLT technology. The DLT8000 drive can be used almost interchangeably with existing DLT tape drives* as a local or remote component of a disaster recovery network.The StorageTek DLT 8000 Tape Drives are a practical choice for efficient archiving of growing volumes of business data. Expansion of existing archival environments is straightforward because the DLT8000 drive is compatible with previous DLT tape generations.

For quickest response, please complete the buy/sell form at the top of the page.

Since 1982, Spectra is your global source for used and refurbished StorageTek Storage Devices!

Specifications
Access time
Tape load and thread to ready:	12 sec formatted, 40 sec unformatted
Data transfer rate, native (uncompressed):	6 MB/sec
Capacity
Capacity, native (uncompressed):	40 GB
Mean time between failures (MTBF)
Tape load	250,000 hr @ 100% duty cycle
Head life	30,000 hr
Uncorrected bit error rate	1×10(-17)
Undetected bit error rate	1×10(-27)
Interface
Interface	Single port Ultra 2 SCSI, 68 pin female connector single port, shortwave, multi-mode optical Fibre Channel port SC duplex connector
Burst transfer rate	LVD 80 MB/sec, HVD 40 MB/sec
Read/write compatibility interface	NL_Port, FC-PLDA (hard and soft AL-PA capability), FC-AL, FCP-2, FC-TAPE
Emulation modes	Proprietary format
Mechanical
Form factor	5.25 in (full height) 8.0 in (full length)
Temperature
Temperature (operating)	+50° to +104° F (+10° to +40 C )
Temperature (non-operating)	-40° to +140° F (-40° to +66° C )
Humidity
Relative humidity (operating)	20%-80%
Relative humidity (non-operating)	10%-95%
Power
Voltage	100-240 VAC @ 50-60 Hz
Voltage	+5 VDC, +12 VDC

Guarantee

All Spectra provided Hitachi Storage Devices are put through a rigorous refurbishment, reconditioning and testing process.

We guarantee our products to be:

• Original equipment manufactured and serial numbered numbered by StorageTek
• Configured to exact user specifications
• Fully refurbished to manufacturers standards of new [ETN]
• All hard drives are 72 hour burn in/Load Tested
• Complete with manufacturers ship group
• Provided with 90 day warranty
• Shipped in a timely manner

Shipping Information and Payment Options

Shipping options:

All of our products are professionally packed and fully insured to avoid any damage in transit.

Spectra offers several shipping options to accommodate every need:
From Ground to Overnight to palletized freight, we have excellent vendors that will handle your shipment in a professional, cost-effective and timely manner.

Payment Options:

Spectra accepts bank wire, ACH, company check, & paypal.
We welcome ALL major credit cards with no surcharge to our customers.