Brocade ICX 6610-48 SAN Switch

Brocade ICX 6610-48 SAN Switch

The Brocade ICX6610-48 SAN Switch redefines the economics of enterprise networking by providing unprecedented levels of performance, availability, and flexibility in a stackable form factor—delivering the capabilities of a chassis with the flexibility and cost-effectiveness of a stackable switch.

Non-Stop High Availability
Brocade ICX 6610 Switches help deliver continuous availability to optimize the user experience. Brocade stacking technology delivers high availability, performing real-time state synchronization across the stack and enabling instantaneous hitless failover to a standby controller in the unlikely event of a failure of the master stack controller. Organizations also can use hot-insertion/removal of stack members to avoid interrupting service when adding a switch to increase the capacity of a stack or replacing a switch that needs servicing.

Additional highlights include:

• Delivers chassis-level performance and availability, providing an optimal user experience for streaming video, Virtual Desktop Infrastructure (VDI), Unified Communications (UC), and other mission-critical campus applications
• Offers unprecedented stacking performance with 320 Gbps of stacking bandwidth, eliminating the need to work around inter-switch bottlenecks
• Provides up to 1 Tbps of total switching capacity with up to 384 1 GbE and 64 10 GbE per stack for campus network edge and aggregation layers
• Provides unmatched availability with four fully redundant 40 Gbps stacking ports per switch, hitless stacking failover, hot switch replacement, and dual hot-swappable power supplies and fan assemblies
• Simplifies network operations and protects investments with the Brocade HyperEdge Architecture, enabling consolidated network management and advanced services sharing across heterogeneous switches.
• Offers up to eight “pay-as-you-need” 10 GbE ports activated through software licensing
• Provides peace of mind with Brocade Assurance Limited Lifetime Warranty

For quickest response, please complete the buy/sell form at the top of the page.

Since 1982, Spectra
is your global source for used and refurbished Brocade switches!

Models
ICX6610-48-F ICX6610-48-P
	24 or 48 RJ-45 Ports		24 SFP Ports	24 or 48 PoE+ Ports
	Brocade ICX 6610-24	Brocade ICX 6610-48	Brocade ICX 6610-24F	Brocade ICX 6610-24P	Brocade ICX 6610-48P
Switching capacity (data rate, full duplex)	528 Gbps	576 Gbps	528 Gbps	528 Gbps	576 Gbps
Forwarding capacity (data rate, full duplex)	396 Mpps (wire speed)	432 Mpps (wire speed)	396 Mpps (wire speed)	396 Mpps (wire speed)	432 Mpps (wire speed)
Stacking bandwidth (data rate, full duplex)	320 Gbps	320 Gbps	320 Gbps	320 Gbps	320 Gbps
10/100/1000 Mbps RJ-45 ports	24	48	n/a	24	48
100/1000 Mbps SFP ports	n/a	n/a	24	n/a	n/a
Dual-mode 1/10 GbE SFP/SFP+ ports (10 GbE SFP+ optional upgrade license)	8	8	8	8	8
40 Gbps QSFP stacking ports	4	4	4	4	4
PoE Power Budget (two power supplies)	n/a	n/a	n/a	1500 W	1500 W
Maximum PoE Class 3 ports	n/a	n/a	n/a	24 (one power supply)	48 (one power supply)
Maximum PoE+ ports	n/a	n/a	n/a	24 (one power supply)	48 (two power supplies)
Redundant/load-sharing; hot-swappable power supplies (second optional)	2×250 W	2×250 W	2×250 W	2×1000 W	2×1000 W
Weight (one power supply/one fan tray)	6.42 kg (14.15 lb)	6.78 kg (14.95 lb)	6.69 kg (14.75 lb)	7.10 kg (15.65 lb)	7.46 kg (16.45 lb)
Dimensions	429 mm (16.880 in.) W x 406.4 mm (16.00 in.) D x 44 mm (1.732 in.) H – 1RU
Airflow	Front to back (reversible)

System Architecture
Connector options	10/100/1000 ports: RJ-45 1 Gbps SFP ports: SX, LX, LHA, LHB, 1000Base-BX, CWDM 10 Gbps SFP+ ports: Direct-attached copper (Twinax), SR, LR Stacking ports: 40 GbE QSFP for use with direct-attached 1 meter or 5 meter stacking cable Out-of-band Ethernet management: 10/100/1000 Mbps RJ-45 Console management: RJ-45 serial
Maximum MAC addresses	32,000
Maximum VLANs	4096
Maximum STP (spanning trees)	254
Maximum routes (in hardware)	16,000
Trunking	Maximum ports per trunk: 8 Maximum trunk groups: 124
Maximum jumbo frame size	9000 bytes
Layer 2 switching	802.1s Multiple Spanning Tree 802.1x Authentication Auto MDI/MDIX BPDU Guard, Root Guard Dual-Mode VLANs Dynamic VLAN Assignment Dynamic Voice VLAN Assignment Fast Port Span GARP VLAN Registration Protocol IGMP Snooping (v1/v2/v3) Link Fault Signaling (LFS) MAC Address Locking; Port Security MAC-Layer Filtering MAC Learning Disable MLD Snooping (v1/v2) Multi-device Authentication Per-VLAN Spanning Tree (PVST/PVST+/PVRST) Mirroring – Port-based, ACL-based, MAC Filter-based, and VLAN-based Port Loop Detection Private VLAN Protected Link Groups Protocol VLAN (802.1v), Subnet VLAN Remote Fault Notification (RFN) Single-instance Spanning Tree Single-link LACP Trunk Groups Uni-Directional Link Detection (UDLD)
Base Layer 3 routing	IPv4 static routes ECMP Port-based Access Control Lists L3/L4 ACLs Host routes Virtual Interfaces Routed Interfaces Route-only Support Routing Between Directly Connected Subnets HyperEdge service propagation
Premium Layer 3 routing	IPv4 and IPv6 static and dynamic routes OSPF v2, OSPF v3 (IPv6) PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4/IPv6 multicast routing functionality) PBR RIP v1/v2, RIPng (IPv6) Virtual Route Redundancy Protocol (VRRP) VRRP-E, VRRP-E (IPv6) VRRPv3 (IPv6)
Advanced Layer 3 routing	BGP4, BGP4+(IPv6) GRE IPv6 over IPv4 tunnels VRF (IPv4 and IPv6)
Metro features	Metro-Ring Protocol (v1, v2) Virtual Switch Redundancy Protocol (VSRP) VLAN Stacking (Q-in-Q) VRRP Topology Groups
Quality of Service (QoS)	ACL Mapping and Marking of ToS/DSCP ACL Mapping and Marking of 802.1p ACL Mapping to Priority Queue ACL Mapping to ToS/DSCP Classifying and Limiting Flows Based on TCP Flags DHCP Relay DiffServ Support Honoring DSCP and 802.1p MAC Address Mapping to Priority Queue Priority Queue Management using Weighted Round Robin (WRR), Strict Priority (SP), and a combination of WRR and SP
IEEE standards compliance	802.1AB LLDP/LLDP-MED 802.1D-2004 MAC Bridging 802.1p Mapping to Priority Queue 802.1s Multiple Spanning Tree 802.1w Rapid Spanning Tree 802.1x Port-based Network Access Control 802.3 10 Base-T 802.3ab 1000 Base-T 802.3ad Link Aggregation (Dynamic and Static) 802.3ae 10 Gigabit Ethernet 802.3af Power over Ethernet 802.3at Power over Ethernet Plus 802.3u 100 Base-TX 802.3x Flow Control 802.3z 1000Base-SX/LX 802.3 MAU MIB (RFC 2239) 802.3ba 40Gbps Ethernet 802.1AE – MACsec (HW Capable) 802.3az-2010 – EEE (HW Capable)
Traffic management	ACL-based inbound rate limiting and traffic policies Broadcast, multicast, and unknown unicast rate limiting Inbound rate limiting per port Outbound rate limiting per port and per queue
High availability	Redundant hot swappable internal power supplies Hot-swappable fan trays L3 VRRP protocol redundancy Real-time state synchronization across the stack Hitless failover from master to standby stack controller Protected link groups Hot insertion and removal of stacked units
Management
Management and control	Auto Configuration Brocade HyperEdge technology* Configuration Logging Digital Optical Monitoring Display Log Messages on Multiple Terminals Embedded Web Management Embedded DHCP Server Industry-Standard Command Line Interface (CLI) Key-based activation of optional software features Integration with HP OpenView for Sun Solaris, HP-UX, IBM AIX, and Windows Brocade Network Advisor support MIB Support for MRP, Port Security, MAC Authentication, and MAC-based VLANs Out-of-band Ethernet Management RFC 783 TFTP RFC 854 TELNET Client and Server RFC 951 Bootp RFC 1157 SNMPv1/v2c RFC 1213 MIB-II RFC 1493 Bridge MIB RFC 1516 Repeater MIB RFC 1573 SNMP MIB II RFC 1643 Ethernet Interface MIB RFC 1643 Ethernet MIB RFC 1724 RIP v1/v2 MIB RFC 1757 RMON MIB RFC 2068 Embedded HTTP RFC 2131 DHCP Server and DHCP Relay RFC 2570 SNMPv3 Intro to Framework RFC 2571 Architecture for Describing SNMP Framework RFC 2572 SNMP Message Processing and Dispatching RFC 2573 SNMPv3 Applications RFC 2574 SNMPv3 User-based Security Model RFC 2575 SNMP View-based Access Control Model SNMP RFC 2818 Embedded HTTPS RFC 3176 sFlow SNTP Simple Network Time Protocol Support for Multiple Syslog Servers
Embedded security	802.1X Accounting MAC Authentication Bi-level Access Mode (Standard and EXEC Level) EAP pass-through support IEEE 802.1X username export in sFlow Protection against Denial of Service (DoS) attacks
Secure management	Authentication, Authorization, and Accounting (AAA) Advanced Encryption Standard (AES) with SSHv2 RADIUS/TACACS/TACACS+ Secure Copy (SCP) Secure Shell (SSHv2) Username/Password Web authentication
Environment
Temperature	Operating temperature: 0°C to 40°C/32°F to 104°F Storage temperature: −25°C to 70°C/13°F to 158°F
Humidity	Relative humidity: 5% to 95%, non-condensing
Altitude	Storage altitude: 10,000 ft (3000 m) maximum
Acoustic	From 39.6 dB (24 ports, one fan, one power supply) to 48.7 dB (48 ports, two fans, two power supplies)
Power
Power supplies	Up to two internal, redundant, field-replaceable, load-sharing AC or DC power supplies with dedicated system and PoE power
Power inlet	C13
Input voltage	Typical 100 to 240 VAC
Input line frequency	50 to 60 Hz
Power draw (no PoE load)	Model With 1 power supply With 2 power supplies Brocade ICX 6610-24 120 W 140 W Brocade ICX 6610-48 165 W 185 W Brocade ICX 6610-24F 125 W 145 W Brocade ICX 6610-24P 120 W 140 W Brocade ICX 6610-48P 165 W 185 W

Guarantee

All Spectra
provided Brocade Switches are put through a rigorous refurbishment, reconditioning and testing process.
We guarantee our products to be:

• Original equipment manufactured and serial numbered numbered by Brocade
• Configured to exact user specifications
• Fully refurbished to manufacturers standards of new [ETN]
• All hard drives are 72 hour burn in/Load Tested
• Complete with manufacturers ship group
• Provided with 90 day warranty
• Shipped in a timely manner

Shipping Information and Payment Options

Shipping options:

All of our products are professionally packed and fully insured to avoid any damage in transit.

Spectra offers several shipping options to accommodate every need:
From Ground to Overnite to palletized freight, we have excellent vendors that will handle your shipment in a professional, cost-effective and timely manner.

Payment Options:

Spectra accepts bank wire, ACH, company check, & paypal.
We welcome ALL major credit cards with no surcharge to our customers.