Cisco 10-Port Gigabit Ethernet Shared Port Adapter

Cisco 10-Port Gigabit Ethernet Shared Port Adapter

The Cisco 10-Port Gigabit Ethernet Shared Port Adapter is available on high-end Cisco routing platforms offering the benefits of network scalability with lower initial costs and easy upgrades. The Cisco SPA/SIP portfolio continues the company’s focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows deployment of different interfaces (packet over SONET/SDH [POS], ATM, Ethernet, etc.) on the same interface processor.

Gigabit Ethernet interfaces are commonly used for interconnecting routers or other devices within a central office or data center or in a metropolitan-area network (MAN). Cisco offers an extensive variety of 1000BASE-X Gigabit Ethernet SPAs to meet customers’ needs for various applications. With Cisco Gigabit Ethernet SPAs, users can mix-and-match SPA ports with other types of interfaces in the same slot. Each SPA provides standards-based Gigabit Ethernet implementation for compatibility and interoperability.

Applications
The Cisco Gigabit Ethernet SPAs can be used in multiple applications, including:

• Inter- and intra-point of presence (POP) aggregation
• Metro Ethernet
• Internet peering

Key Features and Benefits
he Cisco SPA/SIP portfolio offers many advantages, including:

• Highly modular, flexible, intelligent interface processors
  • Superior flexibility, providing mix-and-match capability of interface types on the same interface processor for consistent services, independent of access technology
  • Pioneering programmable interface processors that provide flexibility for the service diversity required in next-generation networks
  • Innovative design that provides intelligent delivery of services without compromising on performance
• Increased speed-to-service revenue
  • The scalable, programmable Cisco architecture extended to 10 Gbps dramatically improves customer density, increasing potential revenue per platform.
  • Interface breadth (copper, channelized, POS, ATM, and Ethernet) on a modular interface processor allows service providers to roll out new services more quickly, helping ensure that all customers large and small receive consistent, secure, and guaranteed services.
  • High-density Small Form-Factor Pluggable (SFP) interfaces are featured for high-port-count applications with reach flexibility. Future optical technology improvements can be adopted using existing SPAs.
• Dramatically improved return on your routing investment
  • Improved slot economics and increased density reduce capital expenditures (CapEx).
  • The ability to easily add new interfaces as they are needed helps enable a “pay-as-you-grow” business model.
  • SPAs are shared across multiple platforms, and can be easily moved from one to another, providing consistent feature support, accelerated product delivery, and a significant reduction in operating expenses (OpEx) through common sparing as service needs change.

For quickest response, please complete the buy/sell form at the top of the page.

Since 1982, Spectra
is your global source for used and refurbished Cisco Routers and Switches!

Part Number	Product Description
SPA-2X1GE	Cisco 10-Port Gigabit Ethernet Shared Port Adapter
SPA-2X1GE=	Cisco 10-Port Gigabit Ethernet Shared Port Adapter, Spare
SPA-5X1GE	Cisco 10-Port Gigabit Ethernet Shared Port Adapter
SPA-5X1GE=	Cisco 10-Port Gigabit Ethernet Shared Port Adapter, Spare
SPA-8X1GE	Cisco 10-Port Gigabit Ethernet Shared Port Adapter
SPA-8X1GE=	Cisco 10-Port Gigabit Ethernet Shared Port Adapter, Spare
SPA-10X1GE	Cisco 10-Port Gigabit Ethernet Shared Port Adapter
SPA-10X1GE=	Cisco 10-Port Gigabit Ethernet Shared Port Adapter, Spare
SFP-GE-S	Cisco Extended Temperature SX SFP
SFP-GE-S=	Cisco Extended Temperature SX SFP, Spare
SFP-GE-L	Cisco Extended Temperature LX/LH SFP
SFP-GE-L=	Cisco Extended Temperature LX/LH SFP, Spare
SFP-GE-Z	Cisco Extended Temperature ZX SFP
SFP-GE-Z=	Cisco Extended Temperature ZX SFP, Spare
SFP-GE-T	1000BASE-T SFP
SFP-GE-T=	1000BASE-T SFP, Spare
Specifications
Product compatibility	• Cisco Catalyst 6500 Series Switches (2-port, 5-port, and 10-port Gigabit Ethernet [GE] SPAs) • Cisco 7600 Series Router (2-port, 5-port, and 10-port GE SPAs) • Cisco 12000 Series Router (5-port and 10-port GE SPAs) • Cisco XR 12000 Series Router (5-port and 10-port GE SPAs) • Cisco CRS Carrier Routing System (8-port GE SPA)
Port density per SPA	2-port, 5-port, 8-port, and 10-port Gigabit Ethernet
Physical interface	Short wavelength (SX), long reach/long haul (LX/LH), and extended distance (ZX) SFP, SFP-GE-T
LED Indicators	• SPA status: Bicolor green and amber LEDs encode the SPA status as follows: • LED off: SPA is powered off • LED amber: SPA is powered on and initializing • LED green: SPA is powered on and operational • In addition to the status LED, the SPAs also have a bicolor, surface-mount, right-angle LED dedicated to each port to indicate port status. The green and amber LEDs encode the port status as follows: • LED off: Port is not enabled by software • LED: Port is enabled by software, but there is a problem with the Ethernet link • LED green: Port is enabled by software, and there is a valid Ethernet link
Features and Functions	• Auto-negotiation • Full-duplex operation • 802.1Q VLAN termination • Jumbo frames support (9188 bytes) • Support for command-line interface (CLI)-controlled online insertion and removal (OIR) • 802.3x flow control • Up to 4000 VLANs per SPA • Up to 5000 MAC accounting entries per SPA (source MAC accounting on the ingress and destination MAC accounting on the egress) • Up to 2000 MAC address entries for destination MAC address filtering per SPA, and up to 1000 MAC address filtering entries per port • Per-port byte and packet counters for policy drops; oversubscription drops; cyclic-redundancy-check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets • Per-VLAN byte and packet counters for policy drops; oversubscription drops; and unicast, multicast, and broadcast packets • Per-port byte counters for good bytes and dropped bytes • Other software features supported: • Ethernet over Multiprotocol Label Switching (EoMPLS) • QoS • Hot Standby Router Protocol (HSRP) • Virtual Router Redundancy Protocol (VRRP)
Network Management	• Network management using: • Host-system CLI • Simple Network Management Protocol (SNMP) • Inventory- and asset management-related MIBs: • Entity-MIB (RFC 2737) • Cisco-entity-asset-MIB • Fault management: • Cisco-entity-field-replaceable unit (FRU)-control-MIB • Cisco-entity-alarm-MIB • Cisco-entity-sensor-MIB • Physical interface management: • IF-MIB • Etherlike-MIB (RFC 2665) • Other MIBs: • Remote Monitoring (RMON)-MIB (RFC 1757) • Cisco-class-based-QoS-MIB • MPLS-related MIBs • Ethernet MIB/RMON
Reliability and Availability	• OIR of the SPA within the SIP and the optics within the SPA • Field-replaceable SFP optical modules
Physical Specifications	• 2-port, 5-port, and 8-port GE SPAs: • Weight: 0.75 lb (0.34 kg) • Height: 0.8 in. (2.03 cm) (single height) • Width: 6.75 in. (17.15 cm) • Depth: 7.28 in. (18.49 cm) • 10-port GE SPA: • Weight: 1.5 lb (0.68 kg) • Height: 1.4 in. (3.55 cm) (double height) • Width: 6.75 in. (17.15 cm) • Depth: 7.28 in. (18.49 cm)
Power	• 2-port GE SPA: 12.5W • 5-port GE SPA: 18.1W • 8-port GE SPA: 20W • 10-port GE SPA: 25W
Environmental Specifications	• Storage temperature: -38 to 150°F (-40 to 70°C) • Operating temperature, nominal: 32 to 104°F (0 to 40°C) • Operating temperature, short term: 32 to 131°F (0 to 55°C) • Storage relative humidity: 5 to 95% relative humidity • Operating humidity, nominal: 5 to 85% relative humidity • Operating humidity, short term: 5 to 90% relative humidity • Operating altitude: -60 to 4000 meters
Compliance and Agency Approvals	Safety • UL 60950-1 • CSA C22 No. 60950-1 • EN 60950-1 • IEC 60950-1 • AS/NZS 60950 • EN 60825-1 • EN 60825-2 • 21 CRF 1040 EMC • CFR 47 • FCC Part 15-Class A • ICES 003-Class A • CISPR 22 Class A • EN 55022 Class A • EN 300386 Class A • AS/NZS Class A • VCCI-Class B • EN 50082-1 • EN 55024 • IEC/EN61000-4-2 Electrostatic Discharge Immunity (8-kV contact, 15-kV air) • IEC/EN61000-4-3 Radiated Immunity (10 V/m) • IEC/EN61000-4-4 Electrical Fast Transient Immunity (2-kV power, 1-kV signal) • IEC/EN61000-4-5 Surge AC Port (4-kV CM, 2-kV DM) • IEC/EN61000-4-5 Surge Signal Port (1-kV indoor, 2-kV outdoor) • IEC/EN61000-4-5 Surge DC Port (1 kV) • IEC/EN61000-4-6 Immunity to Conducted Disturbances (10 Vrms) • IEC/EN61000-4-8 Power Frequency Magnetic Field Immunity (30 A/m) • IEC/EN61000-4-11 Voltage Dips, Short Interruptions, and Voltage Variations Telecom • IEEE 802.3z • Industry Standards The Cisco Gigabit Ethernet SPAs are designed to meet the following requirements (some qualifications are currently in progress): • SR-3580-Network Equipment Building Standards (NEBS): criteria levels (Level 3 compliant) • GR-63-CORE-NEBS: Physical protection • GR-1089-CORE-NEBS EMC and safety

Guarantee

All Spectra
provided Cisco Routers and Switches are put through a rigorous refurbishment, reconditioning and testing process.
We guarantee our products to be:

• Original equipment manufactured and serial numbered numbered by Cisco
• Configured to exact user specifications
• Fully refurbished to manufacturers standards of new [ETN]
• All hard drives are 72 hour burn in/Load Tested
• Complete with manufacturers ship group
• Provided with 90 day warranty
• Shipped in a timely manner

Shipping Information and Payment Options

Shipping options:

All of our products are professionally packed and fully insured to avoid any damage in transit.

Spectra offers several shipping options to accommodate every need:
From Ground to Overnite to palletized freight, we have excellent vendors that will handle your shipment in a professional, cost-effective and timely manner.

Payment Options:

Spectra accepts bank wire, ACH, company check, & paypal.
We welcome ALL major credit cards with no surcharge to our customers.