Cisco 7600 Series SPA Interface Processor-200

Cisco 7600 Series SPA Interface Processor-200

The Cisco 7600 Series SPA Interface Processor-200 helps enable high-performance, intelligent WAN services. Enterprises and service providers can take full advantage of the increased scalability, performance, and rich features offered by the Cisco 7600 SIP-200, along with the many options for WAN aggregation and connectivity offered in the Cisco SPA/SIP portfolio. The Cisco 7600 SIP-200 provides feature parity with the Enhanced FlexWAN while offering twice the performance and increased scalability.

Cisco 7600 Series Routers offer innovative, next-generation converged services for enterprises and service providers. Built on foundation technologies such as security, QoS, and high availability, the Cisco SPA/SIP portfolio helps enable the delivery of these value-added services for new revenue streams.

The Cisco 7600 SIP-200 is supported both on Cisco 7600 platform and Catalyst 6500 platform.

Ideal for enterprise headend and service provider edge aggregation, the Cisco 7600 SIP-200 supports up to 622 Mbps of bandwidth and numerous interfaces. (Note: Bandwidth is expected to decrease when QoS is enabled.) The innovative architecture of this industry-leading WAN services module delivers Cisco 7500 Series feature parity and feature velocity for time-to-market solutions.

The Cisco 7600 SIP-200 helps enterprises and service providers deploy high-density WAN aggregation, based on Frame Relay, Point-to-Point Protocol (PPP), High-Level Data Link Control (HDLC), ATM, or Packet over SONET/SDH (POS). Additionally, service providers can take advantage of the Multiprotocol Label Switching (MPLS) and Any Transport over MPLS (AtoM) options supported on the Cisco 7600 SIP-200 to offer Layer 2 and Layer 3 VPNs. Rich QoS features and distributed processing attributes of the Cisco 7600 SIP-200 make it a cornerstone of a highly scalable WAN aggregation solution. Higher-layer applications can easily be supported on this end-to-end network to allow intelligent data, voice, video, and security services – all on the same platform – to provide integrated, easy-to-use application delivery and control.

The unique value the Cisco 7600 Series provides is the convergence supported from the physical layer to a highly scalable application layer. The Cisco 7600 SIP-200 simplifies network design and deployment by allowing consolidation of LAN, WAN, and metropolitan-area network (MAN) interfaces into a single, highly scalable platform. The Cisco 7600 SIP-200, by integrating WAN termination, rich QoS features, bandwidth optimization, and security on the same module, obviates the need for multiple service modules, offering tremendous cost savings. The rich classification features supported on the Cisco 7600 SIP-200 enable identification of packets from Layer 2 to Layer 7 of the OSI model, enabling application-level intelligence and security in the network.

The rich QoS features of the Cisco 7600 SIP-200 enable users to:

• Classify and mark packets for QoS treatment within the network
• Deliver bandwidth to business-critical applications
• Limit bandwidth to non-critical applications
• Avoid network congestion by dropping select low-priority packets
• Smooth out bursts and avoid packet discard in the network

In addition, low-speed WAN aggregation features supported include:

• Compressed Real-Time Protocol (cRTP) to maximize bandwidth utilization
• Distributed link fragmentation and interleaving (dLFI) to minimize jitter
• Multilink PPP (MLPPP), Multilink Frame Relay Protocol (MLFR), ATM VC Bundle, and Frame Relay VC Bundle to bundle multiple low-speed links

For quickest response, please complete the buy/sell form at the top of the page.

Since 1982, Spectra
is your global source for used and refurbished Cisco Routers and Switches!

Part Number	Product Description
7600-SIP-200	Cisco 7600 Series SPA Interface Processor-200
7600-SIP-200=	Cisco 7600 Series SPA Interface Processor-200, spare
MEM-SIP-200-512M	512 MB memory for Cisco 7600 SIP-200
MEM-SIP-200-512M=	512 MB memory for Cisco 7600 SIP-200, spare
MEM-SIP-200-1G	1 GB memory for Cisco 7600 SIP-200
MEM-SIP-200-1G=	1 GB memory for Cisco 7600 SIP-200, spare
Specifications
Compatibility	Cisco 7600 Series SUP32-3B, SUP720-3B, SUP720-3BXL, RSP720-3C, RSP720-3CXL, RSP720-3C-10G, and RSP720-3CXL-10G systems
Minimum Software Compatibility	Cisco IOS® Software Release 12.2(18)SXE, or later
Protocols	• TCP • User Datagram Protocol (UDP) • IPv4 Unicast and Multicast • IPv6 Unicast and Multicast • MPLS
Encapsulation	• Frame Relay • Multilink Frame Relay – FRF.16 • PPP • MLPPP • Bridge Control Protocol (BCP) • High-Level Data Link Control (HDLC) • ATM permanent virtual circuit (PVC)-constant bit rate (CBR), variable bit rate real-time (VBR-rt), VBR non-real-time (VBR-nrt), and unspecified bit rate (UBR) • ATM switched virtual circuit (SVC)-CBR, VBR-rt, VBR-nrt, UBR, and UBR+ • POS
Cards, Ports, and Slots	Four SPA bays per Cisco 7600 SIP-200. The SIP-200 supports oversubscription.
QoS	• Modular QoS CLI (MQC) • Classification • ACLs • IP Precedence • IPv4 and IPv6 • Differentiated services code point (DSCP) • MPLS experimental values (MPLS EXP) • Frame Relay Discard Eligibility • ATM cell loss priority (CLP) • QoS mappings – CLP, DE to IP type of service (ToS), MPLS EXP; and conversely • Hierarchical QoS
Queuing	• Per-virtual circuit queuing • Low-latency queuing (LLQ) • Weighted Fair Queuing (WFQ) • Class-Based Weighted Fair Queuing (CBWFQ)
Congestion Avoidance	Weighted Random Early Detection (WRED)
Traffic Marking, Shaping, and Bandwidth Policing
Fragmentation	• Distributed link fragmentation and interleaving (dLFI) • Frame Relay Forum FRF.12
ACLs and Security	• Standard, extended, dynamic, reflexive, and time-based ACLs • Classification based on packet length
Bandwidth Efficiency	• cRTP • ATM permanent-virtual-circuit (PVC) bundles • Frame Relay virtual circuit bundles
Layer 2 Bridging and Interworking	• RFCs 1483 and RFC 2684 ATM Virtual Circuits – Routed and Bridged • RFC 1490 Frame Relay Virtual Circiuts – Routed and Bridged • Multipoint Bridging for RFC 1483 virtual circuits • Multipoint Bridging for RFC 1490 virtual circuits • Bridge Control Protocol • Bridging of routed encapsulation • Routed bridged encapsulation
Layer 2 and Layer 3 VPNs	• RFC 2547 MPLS VPNs • Ethernet over MPLS (EoMPLS) • ATM over MPLS (ATMoMPLS) • ATM Adaptation Layer 5 (AAL5) virtual circuit mode, single-cell relay virtual circuit mode • Frame Relay over MPLS (FRoMPLS) • PPP over MPLS (PPPoMPLS) • HDLC over MPLS (HDLCoMPLS) • Virtual circuit-to-virtual circuit local switching – Frame Relay, ATM – AAL0, AAL5
High Availability	• Nonstop forwarding (NSF) • Stateful switchover (SSO) • Automatic Protection Switching (APS) with ATM, POS SPAs • OIR
Memory	• 512-MB default Double Data Rate (DDR) synchronous dynamic RAM (SDRAM) • Optionally upgradable to 1-GB DDR SDRAM memory
Supported SPAs	ATM • Cisco 2-Port OC-3c/STM-1c ATM Shared Port Adapter • Cisco 4-Port OC-3c/STM-1c ATM Shared Port Adapter POS/Channelized • Cisco 2-Port OC-3c/STM-1c POS Shared Port Adapter • Cisco 4-Port OC-3c/STM-1c POS Shared Port Adapter • Cisco 1-Port Channelized OC-3c/STM-1c POS Shared Port Adapter Copper/Channelized • Cisco 8-Port Channelized T1/E1 Shared Port Adapter • Cisco 2-Port Clear Channel T3/E3 Shared Port Adapter • Cisco 4-Port Clear Channel T3/E3 Shared Port Adapter • Cisco 2-Port Channelized T3 (DS0) Shared Port Adapter • Cisco 4-Port Channelized T3 (DS0) Shared Port Adapter • Cisco 4-Port Serial Shared Port Adapter Fast Ethernet • Cisco 4-Port Fast Ethernet Shared Port Adapter • Cisco 8-Port Fast Ethernet Shared Port Adapter
Environmental Conditions	• Operating temperature: 32 to 104°F (0 to 40°C) • Storage temperature: -40 to 167°F (-20 to 70°C) • Relative humidity: 10 to 90%, noncondensing • Operating altitude: -60 to 2000m
MIBs	• Cisco Entity MIB (CISCO-ENTITY-MIB) • Cisco Entity Asset MIB • CISCO-ENTITY-VENDOR-OIDTYPE-MIB OID • Cisco Entity Field-Replaceable Unit (FRU) Control MIB • CISCO-ENHANCED-MEMPOOL-MIB • CISCO-PROCESS-MIB • CISCO-ENVMON-MIB • Cisco Entity Alarm MIB • Simple Network Management Protocol (SNMP) MIB II (RFC 1213) • Remote Monitoring (RMON) MIB (RFC 1757)
Network Management	• Supported with CiscoWorks CiscoView • CiscoWorks Resource Manager Essentials (RME) • Cisco IP Solution Center (ISC)
Physical Specifications	• Occupies one slot in a Cisco 7600 Series Router • Supports up to 12 Cisco 7600 SIP-200s in a 13-slot chassis • Requires Supervisor Engine SUP32-3B, SUP720-3B, SUP720-3BXL, RSP720-3C, RSP720-3CXL, RSP720-3C-10G, or RSP720-3CXL-10G • Dimensions (H x W x D): 1.74 x 15.3 x 17 in. • Weight: 8.5 lb
Power	• 160W power consumption per Cisco 7600 SIP-200 • 240W maximum power consumption with Cisco 7600 SIP-200 and 4 SPAs
Indicators	Cisco 7600 SIP-200 status: • green (operational) • orange (faulty)
Regulatory Compliance	CE marking
Safety	• UL 60950 • CSA C22.2 No. 60950 • EN60950 • TS001 • IEC 60950 • AS/NZS3260
EMC	• FCC Part 15 Class A • ICES-003 Class A • VCCI Class A • EN55022 Class A • EN55024 • EN50082-1 • CISPR22 Class A • ETS-300 386
Telecommunications Standards	• ITU-T G.610 • ITU-T G.703 • ITU-T G.707 • ITU-T G.783 Sections 9-10 • ITU-T G.784 • ITU-T G.803 • ITU-T G.813 • ITU-T G.825 • ITU-T G.826 • ITU-T G.841 • ITU-T G.957 Table 3 • ITU-T G.958 • ITU-T I.361 • ITU-T I.363 • ITU I.432 • ITU-T Q.2110 • ITU-T Q.2130 • ITU-T Q.2140 • ITU-T O.151 • ITU-T O.171 • ETSI ETS 300 417-1-1 • ACA TS 026 (1997) • BABT/TC/139 (Draft 1e)

Guarantee

All Spectra
provided Cisco Routers and Switches are put through a rigorous refurbishment, reconditioning and testing process.
We guarantee our products to be:

• Original equipment manufactured and serial numbered numbered by Cisco
• Configured to exact user specifications
• Fully refurbished to manufacturers standards of new [ETN]
• All hard drives are 72 hour burn in/Load Tested
• Complete with manufacturers ship group
• Provided with 90 day warranty
• Shipped in a timely manner

Shipping Information and Payment Options

Shipping options:

All of our products are professionally packed and fully insured to avoid any damage in transit.

Spectra offers several shipping options to accommodate every need:
From Ground to Overnite to palletized freight, we have excellent vendors that will handle your shipment in a professional, cost-effective and timely manner.

Payment Options:

Spectra accepts bank wire, ACH, company check, & paypal.
We welcome ALL major credit cards with no surcharge to our customers.