Cisco 2-Port OC-3c/STM-1c POS Shared Port Adapter

Cisco 2-Port OC-3c/STM-1c POS Shared Port Adapter

The Cisco 2-Port OC-3c/STM-1c POS Shared Port Adapter is available on high-end Cisco routing platforms, offering the benefits of network scalability with lower initial costs and easy upgrades. The Cisco SPA/SIP portfolio continues Cisco’s focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows deployment of different interfaces (packet over SONET/SDH [POS], ATM, Ethernet, etc.) on the same interface processor.

The Cisco 2- and 4-Port OC-3 POS SPAs are available with two or four Small Form-Factor Pluggable (SFP) interfaces. SFP modules are available in multiple optical reaches from 2 to 80 kilometers (km).

Key Features and Benefits
The Cisco SPA/SIP portfolio offers many advantages, including:

• Highly modular, flexible, intelligent interface processors
  • Superior flexibility, providing a combination of interface types on the same interface processor for consistent services, independent of access technology.
  • Pioneering programmable interface processors that provide flexibility for the service diversity required in next-generation networks.
  • Innovative design that supports intelligent service delivery without compromising on performance.
• Increased speed to service revenue
  • The scalable, programmable Cisco architecture extended to 10 Gbps dramatically improves customer density, increasing potential revenue per platform.
  • Interface breadth (copper, channelized, POS, ATM, and Ethernet) on a modular interface processor allows service providers to roll out new services more quickly, helping ensure that all customers large and small receive consistent, secure, and guaranteed services.
  • High-density SFP interfaces are featured for high-port-count applications with reach flexibility. Future optical technology improvements can be adopted using existing SPAs.
• Dramatically improved return on your routing investment
  • Improved slot economics and increased density reduce capital expenditures (CapEx).
  • The ability to easily add new interfaces as they are needed enables a “pay-as-you-grow” business model.
  • SPAs are shared across multiple platforms, and can be easily moved from one to another, providing consistent feature support, accelerated product delivery, and a significant reduction in operating expenses (OpEx) through common sparing as service needs change.

For quickest response, please complete the buy/sell form at the top of the page.

Since 1982, Spectra
is your global source for used and refurbished Cisco Routers and Switches!

Part Number	Product Description
SPA-2XOC3-POS	Cisco 2-Port OC-3c/STM-1c POS Shared Port Adapter
SPA-4XOC3-POS	Cisco 4-Port OC-3c/STM-1c POS Shared Port Adapter
SFP-OC3-MM	OC-3/STM-1 SFP, MM, SR
SFP-OC3-SR	OC-3/STM-1 SFP, SM, SR
SFP-OC3-IR1	OC-3/STM-1 SFP, SM, IR-1
SFP-OC3-LR1	OC-3/STM-1 SFP, SM, LR-1
SFP-OC3-LR2	OC-3/STM-1 SFP, SM, LR-2
Specifications
Product Compatibility	Cisco 7304 Router Cisco Catalyst 6500 Series Switches Cisco 7600 Series Routers Cisco ASR 1000 Series Router Cisco CRS-1 and CRS-3 (4-port OC-3 POS SPA)
Port Density per SPA	2 ports 4 ports
Physical Interface	OC-3c/STM-1c SFP optics module (refer to optical parameters in Table 2) Visual status indicators (LEDs): • SPA status LED • Per-port LEDs • Carrier and alarm • Active and loopback
Protocols	High-Level Data Link Control (HDLC), RFC 2615 Point-to-Point Protocol (PPP), RFC 1662 Frame Relay, RFC 2427 IPv4/IPv6
Features and Functions	Synchronization • Local (internal) or loop timed (recovered from network) • Pointer activity monitoring Local (diagnostic) and line (network) loopback Section data communications channel (SDCC) – platform-dependent feature Payload mapping • POS with 1 + x^43 self -synchronous scrambler SONET/SDH compliance • Telcordia (Bellcore) GR-253-CORE (as applicable) • ANSI T1.105 and T1.231 • ITU-T G.707, G.957, and G.825 (as applicable) Supported SONET/SDH alarm and signal events: • Signal failure bit error rate (SF-ber) • Signal degrade bit error rate (SD-ber) • Signal label payload construction (C2) • Path trace byte (J1) Section • Loss of signal (LOS) • Loss of frame (LOF) • Error counts for B1 • Threshold crossing alarms (TCA) for B1 Line • Line alarm indication signal (LAIS) • Line remote defect indication (LRDI) • Line remote error indication (LREI) • Error counts for B2 • TCA for B2 Path • Path alarm indication signal (PAIS) • Path remote defect indication (PRDI) • Path remote error indication (PREI) • Error counts for B3 • TCA for B3 • Loss of pointer (LOP) • Positive stuffing event (PSE) • Negative stuffing event (NSE) • Path unequipped indication signal (PUNEQ) • Path payload mismatch indication signal (PPLM)
Network Management	RFC 2558 MIB (SONET/SDH) Simple Network Management Protocol (SNMP)
Reliability and Availability	Online insertion and removal (OIR) Field-replaceable SFP optical modules 1 + 1 SONET automatic-protection-switching (APS) and SDH linear multiplex-section-protection (MSP) protocols Single SPA software reset
Physical Specifications	Weight: 0.75 lb (0.34 kg) Height: 0.8 in. (2.03 cm) (single height) Width: 6.75 in. (17.15 cm) Depth: 7.28 in. (18.49 cm)
Power	2-port OC-3c/STM-1c = 13W maximum (no optics) 4-port OC-3c/STM-1c = 14W maximum (no optics)
Environmental Specifications	Operating temperature: 41 to 104°F (5 to 40°C) Storage temperature: -38 to 150°F (-40 to 70°C) Operating humidity: 5 to 85% relative humidity Storage humidity: 5 to 95% relative humidity
Compliance and Agency Approvals	Safety • UL 60950 • CSA 22.2-No.60950 • EN60950 • IEC 60950 CB Scheme • ACA TS001 • AS/NZS 3260 • EN60825IEC60825 laser safety (SR, IR-Class 1) (VSR-Class 1M) • 21CFR1040 – FDA Code of Federal Regulations (USA) laser safety (SR, IR-Class 1) (VSR-Class 1M)1 EMC • FCC Part 15 (CFR 47) • ICES 003 • EN55022 • CISPR 22 • AS/NZ 3548 • VCCI • EN55024 • EN50082-1 • EN61000-6-1 • EN61000-3-2 • EN61000-3-3 Network Equipment Building System (NEBS) This product is designed to meet the following requirements (official qualification may be in progress): • SR-3580 – NEBS: Criteria levels (Level 3 compliant) • GR-63-Core – NEBS: Physical protection • GR-1089-Core – NEBS: EMC and safety ETSI • EN300 386/EN300 386-2 Class B • ETS 300 019 Storage Class 1.1 • ETS 300 019 Transportation Class 2.3 • ETS 300 019 Stationary Use Class 3.1

Guarantee

All Spectra
provided Cisco Routers and Switches are put through a rigorous refurbishment, reconditioning and testing process.
We guarantee our products to be:

• Original equipment manufactured and serial numbered numbered by Cisco
• Configured to exact user specifications
• Fully refurbished to manufacturers standards of new [ETN]
• All hard drives are 72 hour burn in/Load Tested
• Complete with manufacturers ship group
• Provided with 90 day warranty
• Shipped in a timely manner

Shipping Information and Payment Options

Shipping options:

All of our products are professionally packed and fully insured to avoid any damage in transit.

Spectra offers several shipping options to accommodate every need:
From Ground to Overnite to palletized freight, we have excellent vendors that will handle your shipment in a professional, cost-effective and timely manner.

Payment Options:

Spectra accepts bank wire, ACH, company check, & paypal.
We welcome ALL major credit cards with no surcharge to our customers.