Cisco 1-Port OC-192c/STM-64c POS/RPR Shared Port Adapter

Cisco 1-Port OC-192c/STM-64c POS/RPR Shared Port Adapter

The Cisco 1-Port OC-192c/STM-64c POS/RPR Shared Port Adapter is available on high-end Cisco routing platforms, offering the benefits of network scalability with lower initial costs and easy upgrades. The Cisco SPA/SIP portfolio continues Cisco’s focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows different interfaces (packet over SONET/SDH [POS], ATM, Ethernet, etc.) to be deployed on the same interface processor.

The Cisco 1-Port OC-192 POS/RPR SPA provides 10-Gbps Small Form-Factor Pluggable (XFP) interfaces in addition to fixed interfaces. SPA configurations are available to support multiple optical reaches from 300 meters to 80 kilometers.

Applications
The Cisco 1-Port OC-192 POS/RPR SPA can be used in multiple applications, including:>

• Access and aggregation
• WAN uplinks
• Internet peering

The Cisco 1-Port OC-192 POS/RPR SPA features both POS for mesh fiber networks and Resilient Packet Ring (RPR) for ring fiber topologies. This SPA complies with the IEEE 802.17 RPR standard and also supports the Spatial Reuse Protocol (SRP) for compatibility with existing Dynamic Packet Transport (DPT)/RPR networks.

Features and Benefits
The Cisco SPA/SIP portfolio offers many advantages, including:

• Highly modular, flexible, intelligent interface processors
  • Superior flexibility, supporting a combination of interface types on the same interface processor for consistent services, independent of access technology.
  • Pioneering programmable interface processors that provide flexibility for the service diversity required in next-generation networks.
  • Innovative design that supports intelligent service delivery without compromising on performance.
• Increased speed to service revenue
  • The scalable, programmable Cisco architecture extended to 10 Gbps dramatically improves customer density, increasing potential revenue per platform.
  • Interface breadth (copper, channelized, POS, ATM, and Ethernet) on a modular interface processor allows service providers to roll out new services more quickly, helping ensure that all customers large and small receive consistent, secure, and guaranteed services.
  • High-density SFP interfaces are featured for high-port-count applications with reach flexibility. Future optical technology improvements can be adopted using existing SPAs.
• Dramatically improved return on your routing investment
  • Improved slot economics and increased density reduce capital expenditures (CapEx).
  • The ability to easily add new interfaces as they are needed enables a “pay-as-you-grow” business model.
  • SPAs are shared across multiple platforms, and can be easily moved from one to another, providing consistent feature support, accelerated product delivery, and a significant reduction in operating expenses (OpEx) through common sparing as service needs change.

For quickest response, please complete the buy/sell form at the top of the page.

Since 1982, Spectra
is your global source for used and refurbished Cisco Routers and Switches!

Part Number	Product Description
SPA-OC192POS-XFP	Cisco 1-Port OC-192c/STM-64c POS/RPR Shared Port Adapter with XFP Optics
SPA-OC192POS-VSR	Cisco 1-Port OC-192c/STM-64c POS/RPR Shared Port Adapter with VSR Optics
SPA-OC192POS-LR	Cisco 1-Port OC-192c/STM-64c POS/RPR Shared Port Adapter with LR Optics
XFP-10GLR-OC192SR	Single-Mode (SM) Short Reach (SR) XFP Module
XFP-10GER-OC192IR	Single-Mode (SM) Intermediate Reach (IR-2) XFP Module
XFP-10GZR-OC192LR	Single-Mode (SM) Long Reach (LR-2)
CBL-RPR-OC192-L	Long-Length RPR Mate Cable for Single-Port SRP/RPR SPAs (for RPR operation only)
CBL-RPR-OC192-S	Short-Length RPR Mate Cable for Single-Port SRP/RPR SPAs (for RPR operation only)
Specifications
Product Compatibility	• Cisco Catalyst 6500 Series Switches • Cisco 7600 Series Routers • Cisco 12000 Series Routers • Cisco XR 12000 Series Routers • Cisco ASR 1000 Series Router (XFP Optics only) • Cisco ASR 9000 Series Router (XFP Optics only) • Cisco CRS Carrier Routing System
Port Density per SPA	• 1 port • DPT/RPR configuration – two SPAs are needed to connect to one RPR ring
Physical Interfaces	• OC-192c/STM-64c fixed interface or pluggable (XFP) optics module • Connector: • XFP-LC connector • Long reach (LR)-SC connector • Very short reach (VSR)-Standard media termination point (MTP) (multipath optical [MPO]) multifiber optical connectors • RPR operation requires a mate cable-part number CBL-RPR-OC192-L or CBL-RPR-OC192-S • Visual status indicators (LEDs): • SPA status LED • Per-port LEDs • Carrier and alarm • Active and loopback • Protect • Pass-through
Protocols	• High-Level Data Link Control (HDLC), RFC 2615 • Point-to-Point Protocol (PPP), RFC 1662 • Frame Relay, RFC 2427 • IPv4/IPv6 • IEEE 802.17 RPR • IETF 2892-SRP
Features and Functions	• Synchronization • Local (internal) or loop timed (recovered from network) • Layer 3 clock accuracy (± 4.6 ppm) over full operating temperature • Pointer activity monitoring • Local (diagnostic) and line (network) loopback • Section data communication channel (SDCC) -platform-dependent feature • Payload mapping • 1 + x^43 self-synchronous scrambler • SONET/SDH compliance • Telcordia (Bellcore) GR-253-CORE (as applicable) • ANSI T1.105, and T1.231 • ITU-T G.707, G.957, and G.825 (as applicable) • Supported SONET/SDH alarm and signal events • Signal failure bit error rate (SF-ber) • Signal degrade bit error rate (SD-ber) • Signal label payload construction (C2) • Path trace byte (J1) • Section • Loss of signal (LOS) • Loss of frame (LOF) • Error counts for B1 • Threshold crossing alarms (TCA) for B1 • Error counts for B2 • Threshold crossing alarms (TCA) for B2 • Line • Line alarm indication signal (LAIS) • Line remote defect indication (LRDI) • Line remote error indication (LREI) • Path • Path alarm indication signal (PAIS) • Path remote defect indication (PRDI) • Path remote error indication (PREI) • Error counts for B3 • TCA for B3 • Loss of pointer (LOP) • Positive stuffing event (PSE) • Negative stuffing event (NSE) • Path unequipped indication signal (PUNEQ) • Path payload mismatch indication signal (PPLM)
Network Management	• RFC 2558 MIB (SONET/SDH) • Simple Network Management Protocol (SNMP)
Reliability and Availability	• Online insertion and removal (OIR) • Field-replaceable XFP optical modules • 1 + 1 SONET automatic-protection-switching (APS) and SDH linear multiplex-section-protection (MSP) protocols • Single SPA software reset
Physical Specifications	• Weight: 0.75 lb (0.34 kg) • Height: 0.8 in. (2.03 cm) (single height – XFP interface) • Height: 1.6 in. (4.06 cm) (double height – VSR, LR fixed optics) • Width: 6.75 in. (17.15 cm) • Depth: 7.28 in. (18.49 cm)
Power	15.5W maximum
Environmental Specifications	• Operating temperature: 41 to 104°F (5 to 40°C) • Storage temperature: -38 to 150°F (-40 to 70°C) • Operating humidity: 5 to 85% relative humidity • Storage humidity: 5 to 95% relative humidity
Compliance and Agency Approvals	Safety • UL 60950 • CSA 22.2-No.60950 • EN60950 • IEC 60950 CB Scheme • ACA TS001 • AS/NZS 3260 • EN60825IEC60825 laser safety (SR, IR-Class 1) (VSR-Class 1M)1 • 21CFR1040-FDA Code of Federal Regulations (USA) laser safety (SR, IR-Class 1) (VSR-Class 1M)1 EMC • FCC Part 15 (CFR 47) • ICES 003 • EN55022 • CISPR 22 • AS/NZ 3548 • VCCI • EN55024 • EN50082-1 • EN61000-6-1 • EN61000-3-2 • EN61000-3-3 Network Equipment Building System (NEBS) This product is designed to meet the following requirements (official qualification may be in progress): • SR-3580-NEBS: Criteria levels (Level 3 compliant) • GR-63-Core-NEBS: Physical protection • GR-1089-Core-NEBS: EMC and safety ETSI • EN300 386/EN300 386-2 Class B • ETS 300 019 Storage Class 1.1 • ETS 300 019 Transportation Class 2.3 • ETS 300 019 Stationary Use Class 3.1

Guarantee

All Spectra
provided Cisco Routers and Switches are put through a rigorous refurbishment, reconditioning and testing process.
We guarantee our products to be:

• Original equipment manufactured and serial numbered numbered by Cisco
• Configured to exact user specifications
• Fully refurbished to manufacturers standards of new [ETN]
• All hard drives are 72 hour burn in/Load Tested
• Complete with manufacturers ship group
• Provided with 90 day warranty
• Shipped in a timely manner

Shipping Information and Payment Options

Shipping options:

All of our products are professionally packed and fully insured to avoid any damage in transit.

Spectra offers several shipping options to accommodate every need:
From Ground to Overnite to palletized freight, we have excellent vendors that will handle your shipment in a professional, cost-effective and timely manner.

Payment Options:

Spectra accepts bank wire, ACH, company check, & paypal.
We welcome ALL major credit cards with no surcharge to our customers.